User Tools

Site Tools


Sidebar

Launch of Linino.org

wiki:upgradeimage

How to upgrade the Linino distribution

Upgrade your Linino ONE with sysupgrade

  • As root type the following commands:
$ cd /tmp
$ wget http://download.linino.org/linino_distro/master/latest/openwrt-ar71xx-generic-linino-one-16M-squashfs-sysupgrade.bin		
$ sysupgrade -v openwrt-ar71xx-generic-linino-one-16M-squashfs-sysupgrade.bin	

after about 1 minute the board will reboot and the new image will be loaded on the board.

  • if you want to overwrite all the configuration settings present on the previous image, you have to add the -n option to the sysupgrade command
$ sysupgrade -v -n openwrt-ar71xx-generic-linino-one-16M-squashfs-sysupgrade.bin	

Upgrade your Arduino Yun with sysupgrade

$ cd /tmp
$ wget http://download.linino.org/linino_distro/master/latest/openwrt-ar71xx-generic-linino-yun-16M-250k-squashfs-sysupgrade.bin
$ sysupgrade -v openwrt-ar71xx-generic-linino-yun-16M-250k-squashfs-sysupgrade.bin

after about 1 minute the board will reboot and the new image will be loaded on the board.

  • if you want to overwrite all the configuration settings present on the previous image, you have to add the -n option to the sysupgrade command
$ sysupgrade -v -n openwrt-ar71xx-generic-linino-yun-16M-250k-squashfs-sysupgrade.bin

Upgrade your Linino Freedog with sysupgrade

$ cd /tmp
$ wget http://download.linino.org/linino_distro/master/latest/openwrt-ar71xx-generic-linino-freedog-16M-250k-squashfs-sysupgrade.bin
$ sysupgrade -v openwrt-ar71xx-generic-linino-freedog-16M-250k-squashfs-sysupgrade.bin

after about 1 minute the board will reboot and the new image will be loaded on the board.

  • if you want to overwrite all the configuration settings present on the previous image, you have to add the -n option to the sysupgrade command
$ sysupgrade -v -n openwrt-ar71xx-generic-linino-freedog-16M-250k-squashfs-sysupgrade.bin

Upgrade your Linino Chiwawa with sysupgrade

$ cd /tmp
$ wget http://download.linino.org/linino_distro/master/latest/openwrt-ar71xx-generic-linino-chiwawa-squashfs-sysupgrade.bin
$ sysupgrade -v openwrt-ar71xx-generic-linino-chiwawa-squashfs-sysupgrade.bin

after about 1 minute the board will reboot and the new image will be loaded on the board.

  • if you want to overwrite all the configuration settings present on the previous image, you have to add the -n option to the sysupgrade command
$ sysupgrade -v -n openwrt-ar71xx-generic-linino-chiwawa-squashfs-sysupgrade.bin

PLEASE NOTE: In case of a total upgrade (the one perfomed with the -n option) The new root password will be “doghunter” without quotes

Upgrade your Linino OS using linup command

On the latest release it is possible to use the linup command to automaticalli upgrade your Linino OS to the latest version or to a specific release. The syntax of the comand is:

root@linino:/# linup 

USAGE : linup <revision> ( latest or YYYYMMDD.x where x=0,1,2...n ) \ 
            <branch> ( optional : lininoIO or master )                                                                                 

If you want upgrade your Linino OS to the latest image you can execute the command:

root@linino:/# linup latest               
/var/www/wiki.linino.org/data/pages/wiki/upgradeimage.txt · Last modified: 2015/04/10 03:00 by administrator

2014 © dog hunter llc and the Linino Community. Linino.org is a dog hunter sponsored community project. Credits